Filter by car or select a store

Exhaust System, V-12

XKE-7784

Exhaust System - V-12

Exhaust System, 6-Cylinder

XKE-7783

Exhaust System - 6-Cylinder

Doors & Fittings; BJ7, BJ8

AHY-119

Doors & Fittings; BJ7, BJ8

External Engine 100-6, 3000

AHY-006

External Engine 100-6, 3000

Cylinder Head 100-6 (2 Port)

AHY-008

Cylinder Head 100-6 (2 Port)

Cylinder Head 100-4

AHY-004

Cylinder Head 100-4

Land Rover Defender Heritage Set 1:76 Die Cast Models | Britpart DA1335

DA1335

Maintain long-term reliability and driving confidence with this high-grade Land Rover Defender Heritage Set 1:76 Die Cast Models (Part #DA1335) by Britpart. Built from durable, wear-resistant materials, it offers a direct replacement solution for scheduled maintenance and complete vehicle overhauls.

O Ring | Genuine Land Rover FRC4951

FRC4951

Maintain long-term reliability and driving confidence with this high-grade O Ring (Part #FRC4951) by Genuine Land Rover. Built from durable, wear-resistant materials, it offers a direct replacement solution for scheduled maintenance and complete vehicle overhauls.Key Features & SpecificationsGenuine

Breather Pipe | Aftermarket LLH500200P

LLH500200P

Keep your vehicle operating smoothly with this high-quality Breather Pipe (Part #LLH500200P). Built to deliver dependable everyday performance, this component restores original system efficiency and driving confidence.Key Features & SpecificationsDirect-Fit Replacement: Accurately sized to factory s

Stainless Steel Big Bore Standard Exhaust System by Bell Exhaust

BELL EXHAUST · 009-740

Well-renowned in the classic car market, Bell Steel Fabrications has been making exhaust systems and silencers for over 40 years. Whether they are manufacturing a one-off complex Ferrari exhaust system or a large batch of E-type exhausts, their promise is to never compromise on quality - providing y

Stainless Steel Standard Exhaust System by Bell Exhaust

BELL EXHAUST · 009-741

Well-renowned in the classic car market, Bell Steel Fabrications has been making exhaust systems and silencers for over 40 years. Whether they are manufacturing a one-off complex Ferrari exhaust system or a large batch of E-type exhausts, their promise is to never compromise on quality - providing y

Stainless Steel Standard Exhaust System by Bell Exhaust

BELL EXHAUST · 009-742

Well-renowned in the classic car market, Bell Steel Fabrications has been making exhaust systems and silencers for over 40 years. Whether they are manufacturing a one-off complex Ferrari exhaust system or a large batch of E-type exhausts, their promise is to never compromise on quality - providing y

Aluminium Engine Plate, Triumph GT6

11396-0

Aluminium mounting plate for the GT6 engine.

Windshield, Sprite/Midget

10248-0

Replacement windshield for later Sprite and Midget models.

Chrome-Plated Screw 5/16, MG Midget/Sprite

9461-0

Chrome-plated screw used for mounting the windscreen bay.

Bottom Seal for Windscreen Bay, Austin Healey Sprite (earlier chassis)

11882-0

Rubber seal fitted at the base of the windscreen bay.

Bottom Seal for Windscreen Bay, Austin Healey Sprite (later chassis)

11883-0

Rubber seal fitted at the base of the windscreen bay.

Aluminium Radiator, Morgan

20968-0

Aluminium radiator for cooling system replacement.

Connecting Rod, Triumph Spitfire/TR6

8786-0

Replacement connecting rod for the lower engine assembly.

TR6 Key

10906-0

Oil Deflector, Triumph

10913-0

Deflector that helps control oil flow within the lower engine.

Piston Ring Set +020, Triumph GT6

14141-0

Oversized piston ring set for 2L Triumph engines.

Piston Ring Set +030, Triumph GT6

14142-0

Oversized piston ring set for 2L Triumph engines.

Upper Head Gasket Set, Triumph GT6/Vitesse MK2

12305-0

Reinforced composite head gasket set for the engine's upper section.

Rack, wheel box driving

Unbranded · 501730

Listed by Moss Europe for Jaguar, MG, Morris, Triumph, Minor Series II, TF, TR3, TR3A, TR4, XK120

Gasket Set, cylinder head

501678

Listed by Moss Europe for Triumph, TR2

Original Parts Catalogue, TR2-3A

501653HC

Listed by Moss Europe for Triumph, TR2, TR3, TR3A

Release Bearing, clutch

Unbranded · 501608

Listed by Moss Europe for Triumph, TR2, TR3, TR3A, TR4

Rocker Shaft Assembly

Unbranded · 501583

Listed by Moss Europe for Triumph, TR2, TR3, TR3A

Washer, locking

501577

Listed by Moss Europe for Triumph, TR2, TR3, TR3A

Compression Sleeve

501575

Listed by Moss Europe for Triumph, TR2, TR3, TR3A

Gasket, top cover

501571

Listed by Moss Europe for Triumph, TR2, TR3, TR3A

Peg, sector shaft

Unbranded · 501568

Listed by Moss Europe for MG, Triumph, TA, TB, TC, TR2, TR3, TR3A

Oil Seal, steering rocker shaft

501563

Listed by Moss Europe for Triumph, TR2, TR3, TR3A

Bush, steering box housing

Unbranded · 501562

Listed by Moss Europe for Triumph, TR2, TR3, TR3A

Owners Handbook, TR3A

Unbranded · 501528/3

Listed by Moss Europe for Triumph, TR3A

Wire Wheel Brake Drum Nut

S939D

Retaining nut for the front brake drum on wire wheel setups.

Hand Brake Cable Spring

K330

Return spring for the hand brake cable mechanism.

MG Leather Gear Lever Knob

H363B

Leather-covered knob for the gear lever.

First Motion Shaft Rollers (set of 18)

E058

Set of 18 rollers for the gearbox first motion shaft bearing.

Competition Camshaft

B284A

High-performance camshaft for engine tuning.

Throttle Stop Pin

A879

Pin used in the throttle stop mechanism of the carburettor.

Brake Shoe Set (4 pieces)

K034CX

Set of four brake shoes for the drum brake system.

Hub and Brake Drum Puller (Tool Loan)

X216LOAN

Tool available for loan to pull hubs and brake drums.

Reverse Link Pivot Bolt (Used)

E091

Used pivot bolt for the gearbox reverse link mechanism.

Striker Plate (No Wedge)

C218

Door striker plate without wedge attachment.

Seat Hinge Plate

C373

Hinge plate component for the seat mechanism.

Air Manifold 1.50" (Unpolished)

A569E

Unpolished intake manifold used when fitting 1.5-inch carburettors instead of the standard 1.25-inch type.

Light Transfer

611400

A reproduction transfer/decal relating to vehicle lighting.

Unipart Important Label

JPR573

A reproduction warning/information label decal for Triumph models.

Washer (60078)

60078

A generic washer used in various Triumph models including the TR6.

Outer Sill R/H (1971 on)

14A9534

Right-hand outer sill panel with six flute design.

Radiator Cowling Saloon (1959-1975)

14A6498

Cowling panel that surrounds and directs airflow to the radiator.

Rear Quarter Lower Half Repair L/H (1959-1969, External Door Hinges)

HMP441057

Lower rear quarter repair panel for left-hand side with external door hinge design.

Rear Quarter Lower Half Repair L/H (1969 on, Internal Door Hinge)

HMP441015

Lower rear quarter repair panel for left-hand side with internal door hinge design.

Rear Quarter Lower Half Repair R/H (1959-1969, External Door Hinges)

HMP441056

Lower rear quarter repair panel for right-hand side with external door hinge design.

Rear Quarter Lower Half Repair R/H (1969 on, Internal Door Hinge)

HMP441014

Lower rear quarter repair panel for right-hand side with internal door hinge design.

Rear Quarter Waist Rail Assembly (1969 on)

CZH426

Rear quarter waist rail assembly panel.

Rear Heelboard Complete Assembly (1961 on)

HMP441008

Full-width rear heelboard assembly including subframe mounting points.

Rear Panel Lower Repair Section

HMP441009

Repair panel for the lower edge of the full-width rear panel.

XJS Inter-Flange, RH

Webshop Anglo Parts · 110.555

Right-hand exhaust inter-flange connector for the XJS.

XJS Inter-Sleeve, LH

Webshop Anglo Parts · 110.554

Left-hand exhaust inter-sleeve connector for the XJS.

XJS Inter-Sleeve, RH

Webshop Anglo Parts · 110.553

Right-hand exhaust inter-sleeve connector for the XJS.

Axle Pipe, LH, LWB V12

Jaguar-Daimler · 110.552

Left-hand exhaust axle pipe for long-wheelbase V12 saloons.

Axle Pipe, RH, LWB V12

Jaguar-Daimler · 110.551

Right-hand exhaust axle pipe for long-wheelbase V12 saloons.

Front Exhaust Silencer, LH (XJ V12 S2-3)

Webshop Anglo Parts · 110.550

Left-hand front silencer for the XJ V12 Series 2-3.

Front Exhaust Silencer, RH (XJ V12 S3)

Webshop Anglo Parts · 110.549

Right-hand front silencer for the XJ V12 Series 3.

Exhaust Connecting Pipe, LH (XJ12 S2-3)

Webshop Anglo Parts · 110.548

Left-hand exhaust connecting pipe for XJ12 Series 2-3.

Exhaust Connecting Pipe, RH (XJ12 S2-3 / XJS 5.3-6.0)

Webshop Anglo Parts · 110.547

Right-hand exhaust connecting pipe fitting several V12 XJ and XJS models.

Twin Front Exhaust Pipe, LH, 2-Hole Flanges (XJ12 S2-3)

Webshop Anglo Parts · 110.546

Left-hand twin front exhaust pipe with two-hole flange connections for XJ12 Series 2-3.

Exhaust Front Pipe, V12 (4-hole), RH (Jaguar XJ)

Webshop Anglo Parts · 110.535

Right-hand front exhaust pipe with 4-hole flange for Jaguar XJ V12 models.

XJ6 3.6 LH Rear Section

Webshop Anglo Parts · 110.534

Left-hand rear exhaust section for a Jaguar XJ6 3.6.

BP352 Brake Pad Set

BP352

Front or rear brake pad set fitting a range of Aston Martin, Jaguar, and Jensen models.

Girling BP381 Brake Pad Set

BP381

Brake pad set fitting Healey, MGC, Morgan, Triumph, Lotus, Sunbeam Tiger, and Rover models.

Austin Healey Trunk Script Emblem

EMB152

Chrome trunk script emblem for Austin Healey 100-4, 100-6, and 3000 models.

Austin Healey Gas Tube Grommet

RP9040

Rubber grommet for the fuel tank vent/gas tube on Austin Healey 100-6 and 3000.

Austin Healey Sprite/MG Midget Gas Tube Grommet

RP9043

Rubber grommet for the fuel tank vent/gas tube on Sprite and Midget.

MGB/MGC Gas Tube Grommet

RP9044

Rubber grommet for the fuel tank vent/gas tube on MGB and MGC.

Chrome Vent Mirror for Quarter Light

MR123

Chrome mirror that mounts to a vent window frame on classic cars.

Austin Healey 100-4/100-6/3000 Painted Wire Wheel 15" 48-Spoke

WRW450P

Painted wire wheel for Austin Healey 100 and 3000 models.

Triumph TR2/TR3/TR4/TR4A Gas Tube Grommet

RP9046

Rubber grommet for the fuel tank vent/gas tube on Triumph TR and Spitfire models.

Jaguar XK120/XK140/XK150 Chrome Wire Wheel 16" 60-Spoke

WRW456BX

Chrome wire wheel for Jaguar XK series cars.

Triumph TR250/TR6 Painted Wire Wheel 15" 72-Spoke (Dunlop)

WRW459P

Painted wire wheel for Triumph TR250 and TR6.

Triumph TR250/TR6 Chrome Wire Wheel 15" 72-Spoke

WRW457CX

Chrome wire wheel for Triumph TR250 and TR6.

Weber DGV Carburetor Tuning DVD

98.1515.05

An instructional DVD explaining how to tune a Weber DGV carburetor.

Suspension Cone, Metric Mini

FAM3968

A rubber suspension cone component for metric Mini models.

Fuel Stabilizer and Conditioner

10670

An additive that stabilizes and conditions fuel for stored or classic vehicles.

Fuel Tank - Morris Minor Saloon/Traveller (Large Capacity)

FUL101A

A large-capacity replacement fuel tank for Morris Minor saloon and traveller models.

Wiper Gear, 105 Degree (MG 68-80)

37H3045

Gearbox component for the windshield wiper mechanism.

Handbrake Lever Brake Spring (MGB 63-67)

513772

Spring for the handbrake lever mechanism.

Oil Relief Valve and Spring (TC/TD/TF)

OPS710

Oil pressure relief valve assembly with spring.

Piston Set .030 1500cc (MGA)

CP306.030

Oversized piston set for the 1500cc MGA engine.

Top Radiator Hose (Mini 850/998/1000/1098)

GRH245

Hose connecting the engine to the top of the radiator.

Front Brake Return Spring (Austin-Healey)

AAA4776

Spring that retracts the brake shoes after braking.

Front Shock Bushing Set, Polyurethane (Spitfire/GT6)

517985P

Poly bushings for the front shock absorber mounts.

Bronze Valve Guide Set (Spitfire MkI/MkII)

111869UR

Set of bronze valve guides for cylinder head rebuild.

OE Rear Brake Pads (MK2 / V8 / XK150 / E-Type Series 1)

Rear brake pads that create friction against the rotor to slow the car.

OE Front Brake Pads (MK2/V8/XK150/E-Type Series 1)

Front brake pads that create friction against the rotor to slow the car.

Tank Sender Unit - XK140 & 150

Reproduction fuel tank sender unit for XK140 and XK150 models.

Door Handle & Lock Set - XJS

Original Jaguar door handle and lock set for XJS models up to a specific VIN.

XK150 Grille (Reproduction)

Quality reproduction grille for the XK150.

XK150 Grille (Original)

Original Jaguar grille for the XK150.

Daimler Double Six Coupe Grille Badge

Grille badge for the Daimler Double Six Coupe.

LH Steering Arm - E-Type V12

Used original left-hand steering arm for V12 E-Type models.

Daimler 2.5 V8 Rear Bumper Emblem

Original rear bumper emblem for the Daimler 2.5 V8 with wide rear bumper.

Fuel Pump - XJ8 / XK8

Aftermarket fuel pump fitting Jaguar XJ8 (X308) and XK8 (X100).

Steering Rack - E-Type SI & II (RHD Manual)

Manual steering rack for right-hand drive E-Type Series I and II cars.

Radio Surround - E-Type V12

Trim piece surrounding the radio unit on V12 E-Type models.

Single Brake Pipe Clip

Jaguar · P_AAU6367

Clip used to secure a single brake pipe.

Piston-Acumu

Jaguar · P_AAU6682

Accumulator piston component.

Gearbox Sump Filter

Unknown · P_AAU7085J_A

Filter for BW65/66 automatic gearbox sump.

Gearbox Sump Rubber Gasket

Unknown · P_AAU8434/R

Rubber gasket for Model 65 and 66 automatic gearbox sump.

Gearbox Sump Gasket (Cork)

Jaguar · P_AAU8434J

Cork gasket for Model 65 and 66 automatic gearbox sump.

Self Tapping Screw - Posidome #4 x 1/4" BZP

Unknown · P_AB604021J

Bright zinc plated posi dome head self-tapping screw.

Self Tapping Screw - Posipan #4 x 1/2"

Unknown · P_AB604041J

Posipan head self-tapping screw.

Self-Tapping Screw - Posipan #4 x 1/2" Black

Unknown · P_AB604045J

Black-finished posipan head self-tapping screw.

Self Tapping Screw - Posipan #6 x 1/4" BZP

Unknown · P_AB606021J

Bright zinc plated posipan head self-tapping screw.

Self Tapping Screw - Posipan #6 x 3/8" BZP

Unknown · P_AB606031

Bright zinc plated posipan head self-tapping screw.

Self Tapping Screw - Posipan #6 x 3/8"

Unknown · P_AB606039

Posipan head self-tapping screw.

Self Tapping Screw - Posi Domed #6 x 1/2" BZP

Unknown · P_AB606041J

Bright zinc plated posi domed head self-tapping screw.

HVAC Blower Motor Control Module

917-342

Electronic module that regulates the speed and operation of the HVAC blower motor.

Replacement Blower Motor

917-341

HVAC blower motor that circulates air through the vehicle's climate control system.

Fuel Injection Pressure Regulator

916-642

Maintains correct fuel pressure for the fuel injection system.

Fuel Injector

916-649

Sprays a precise amount of fuel into the engine's intake or cylinders.

Manifold Air Pressure Sensor

917-334

Measures intake manifold pressure to help regulate fuel injection and ignition timing.

Fuel Injection Throttle Body Mounting Gasket

916-647

Seals the throttle body to the intake manifold to prevent air leaks.

DriveAlign Automatic Belt Drive Tensioner Assembly

916-676

Maintains proper tension on the serpentine drive belt.

Fuel Injection Throttle Body

916-644

Controls the amount of air entering the engine for fuel injection.

Micro-V Serpentine Drive Belt

916-678

Drives accessory components such as the alternator and power steering pump.

High Pressure Fuel Pump

917-323

Delivers fuel at high pressure to the direct injection system.

Fuel Pressure Regulator

917-324

Regulates fuel pressure supplied to the engine's fuel system.

Washer Bottle by DaveFab

DAVEFAB · 908-321

Reservoir for storing windshield washer fluid.

Inner Rear Lamp Covers - MGF/TF

Protective ABS plastic covers for the exposed rear lamp units inside the boot area.

Differential Seal - MG RV8

Seal used within the differential assembly to prevent oil leaks.

Front Anti-Roll Bar - MG RV8

Front anti-roll (sway) bar for improved handling stability.

Wheel Arch Flare (RH) - MG RV8

Right-hand wheel arch flare trim piece.

Rear Anti-Roll Bar - MG RV8

Rear anti-roll (sway) bar for improved handling stability.

Wishbone Arm - MG RV8

Suspension wishbone control arm.

Rear Damper Bolt/Stud - MG RV8

Bolt or stud used to secure the rear shock absorber.

Rear Spring Centre Bracket - MG RV8

Central mounting bracket for the rear spring assembly.

Front Bumper Bracket (LH) - MG RV8

Mounting bracket for the left-hand front bumper.

Front Bumper Bracket (RH) - MG RV8

Mounting bracket for the right-hand front bumper.

Rear Bumper-to-Body Bracket (LH) - MG RV8

Bracket connecting the rear bumper to the body shell, left-hand side.

Rear Bumper-to-Body Bracket (RH) - MG RV8

Bracket connecting the rear bumper to the body shell, right-hand side.

Reconditioned Rear Hub (TR4A-6)

TRGB Parts · T15

Exchange reconditioned rear hub for TR4A-6 models, now superseded by a newer part.

Triumph Letterset

TRGB Parts · 703862SET

Set of individual lettering spelling 'Triumph' for badge or trim use.

Crashpad Recovering Service

TRGB Parts · TRIM3

Service to re-trim an old crashpad with stitched vinyl instead of replacing it.

Switch Plinth Recovering Service

TRGB Parts · TRIM4

Service to re-trim an old switch plinth with stitched vinyl instead of replacing it.

Gearbox Reconditioning Service

TRGB Parts · T1

Service to fully recondition a customer's own gearbox for TR2-TR6 models.

Overdrive Reconditioning Service

TRGB Parts · T2

Service to fully recondition a customer's own overdrive unit for TR2-TR6 models.

Differential Reconditioning Service

TRGB Parts · T17/6

Service to fully recondition a customer's own differential unit for TR4A, TR5, and TR6.

TR5/TR6 CP Dashboard in Elm

TRGB Parts · 907709/ELM

High-gloss elm wood dashboard for TR5/TR6 models.

TR6/GT6 Rocker Cover (For Restoration)

TRGB Parts · NSI BIN VA2B

Rocker cover suited for sandblasting and powder coating restoration work.

TR250/TR6 USA Spec Exhaust Fitting Kit

TRGB Parts · GFK6410X

Exhaust fitting kit for TR250-TR6 US-spec cars up to chassis CC67893.

Vent Flap Lid (TR4-6)

TRGB Parts · 705242

Replacement vent flap lid part.

Upper Steering Column Felt

TRGB Parts · 608188

Felt seal for the upper steering column clamp on TR4-6 models.

6-Bolt Steering Wheel Hub Adapter (Sprite MkI/II, Midget MkI)

Bugeyeguy · 6365B

Adapter hub that lets a 6-bolt aftermarket steering wheel be fitted while retaining the original horn function.

Rubber Park Light/Turn Signal Socket (Bugeye)

Moss Motors · 159-600

A rubber housing that holds the front and rear light sockets and prevents lens damage when cracked.

Front Parking Light Socket - Dual Filament (Bugeye)

Bugeyeguy · 552-120

An electrical socket that powers both the front park light and turn signal on a MK1 Austin-Healey Sprite.

Rear Turn Signal Single Filament Bulb Socket (Bugeye)

Bugeyeguy · 159-900

An electrical socket for the rear turn signal bulb on a MK1 Austin-Healey Sprite.

Dash Rehab Kit (Bugeye)

Bugeyeguy

A kit of correct reproduction dash components to restore a Bugeye dashboard to original specification.

Heater/Wiper Push/Pull Switch (without Knob, thru '70)

Moss Motors · 162-100 (SPB104 $28.71)

A replacement heater or wiper switch used to activate the blower when the original cable fails.

Locking Choke Assembly

Moss Motors · 331-490

A T-handle locking choke control that allows the choke setting to be locked in place.

Heater "H" Knob (thru '70)

ashley hinton · 17H1602B (moss: 331-085)

A replacement heater control knob faithfully recreating the original design.

Wiper "W" Knob (Bugeye thru 1970)

ashley hinton · 11K9101A Ashley (Moss: 331-075)

A replacement wiper control knob for MK1 Austin-Healey Sprites.

Washer Pump with Knob (948 Cars)

Bugeyeguy · 565-055

A reproduction windshield washer pump and knob for accurate Bugeye Sprite restorations.

Headlight Switch Bezel

Bugeyeguy · 140-515

A trim bezel that fits around the ignition switch on a MK1 Austin-Healey Sprite dashboard.

New Starter Cable with Knob

AH Spares · XCBS113

A replacement starter cable and knob assembly for MK1 Austin-Healey Sprites.

VVT Intake Cam Seal Installer Tool (2nd Gen)

Flyin' Miata · 35-62106

Slips over the cam end to drive a new seal to the correct depth without scratching engine surfaces.

Valve Spring Compressor

Euroexport Inc · 35-63000

Allows valve springs and seals to be changed without removing the cylinder head.

Front Main Seal Installer Tool (Big Nose Crank, 2nd Gen)

Flyin' Miata · 35-60001 BIG NOSE

Slips over the crank nose to press the front seal in evenly and to correct depth.

Front Main Seal Installer Tool (Short Nose Crank, 2nd Gen)

Flyin' Miata · 35-60001 SHORT NOSE

Slips over the crank nose to press the front seal in evenly and to correct depth.

Rear Main Seal Installer Tool (2nd Gen)

Flyin' Miata · 35-60501

Guides a new rear main seal into place without damaging it during installation.

Crankshaft Bolt Tool

FastTrak Fabrication LP · 35-61000

Holds the crankshaft stationary while torquing or removing the crank bolt.

Cam Gear Ninja Tool

Flyin' Miata · 35-62001

Holds the intake cam in place to ease timing belt and cam timing work on NA/NB engines.

NA/NB Oil Funnel Adapter

Flyin' Miata · 35-51100

Threads into the valve cover to hold a funnel securely in place during oil fills.

NC/ND Oil Funnel Adapter

Flyin' Miata · 35-51110

Threads into the valve cover to hold a funnel securely in place during oil fills.

1.8 NA/NB Oil Filter Drain Funnel

Flyin' Miata · 35-52000

Catches oil cleanly when removing the oil filter on NA/NB engines.

Fuel Line Disconnect Tool (5/16")

Integrated Supply Inc. · 35-56010

Tool for releasing factory quick-disconnect fittings on fuel lines.

Digital Angle Gauge

International Precision Instruments · 35-57000

Magnetic gauge that reads angles in 0.05 degree increments, useful for alignment and shop tasks.

PowerLite Race Alternator Floating Pulley

PowerLite · VAL10015TR6FP

Floating pulley designed to reduce belt whip on race alternators.

PowerLite Lightweight 40A Race Alternator with Floating Pulley

PowerLite · RAC003-R

Lightweight high-output alternator designed for high revving engines.

Brake Shoe Retaining Kit (TR3A-6)

BAU1420A

Kit for retaining rear brake shoes.

Caliper Mounting Bolt 7/16" UNF x 1.5" (TR2-6)

BTB610

Bolt used to mount brake calipers.

Rear Hub Outer Oil Seal (TR4A-6)

GHS133

Grease seal for the IRS rear axle hub.

Brake Master Cylinder Assembly (TR5, TR250, TR6)

GMC234

Replacement brake master cylinder with reservoir and cap.

Rear Wheel Cylinder, Lockheed Type (TR2-TR3)

Triumph · GWC1111

Brake wheel cylinder for the rear axle, Lockheed type.

89mm Cylinder Liner Set (TR2-4A)

Racetorations · BEN301-4

Set of oversized cylinder liners for engine rebuilds.

87mm Billet Slipper Piston & Ring Set (TR2-4A, Morgan +4)

Racetorations · BEN234S

Billet slipper piston and ring set for fast road engines requiring shorter compression height rods.

87.2mm (+0.048) Billet Piston & Ring Set, FIA (TR2-4A, Morgan +4)

Racetorations · BEN233L

FIA-approved largest legal billet piston and ring set for race engines.

87mm Billet Piston & Ring Set (TR2-4A, Morgan +4)

Racetorations · BEN234L

High quality billet piston and ring set replacing original cast pistons.

87.2mm Slipper Piston Ring Set

Racetorations · BEN235

Complete set of piston rings for 87.2mm slipper pistons.

Genuine Mazda Rear Crankshaft Oil Seal & Cover • LF01-11-310

Genuine Mazda · LF01-11-310

Genuine Mazda LF01-11-310 Rear Crankshaft Oil Seal & Cover Replacement Genuine Mazda rear crankshaft oil-seal cover for Mazda MX-5 Mk3, Mk3.5 and Mk3.75 NC models with 1.8 L8-VE or 2.0 LF-VE MZR petrol engines . This assembly is fitted to the rear face of the cylinder block, immediately behind the f

Quinton Hazell Auxiliary Drive Belt With Air Conditioning • QBR62250

Quinton Hazell · QBR62250

Quinton Hazell QBR62250 Auxiliary Drive Belt Replacement Quinton Hazell auxiliary / serpentine drive belt for Mazda MX-5 MK3/NC and MK3.5/3.75 NC 1.8 and 2.0 petrol models fitted with air conditioning , as listed in the compatibility table. The auxiliary drive belt transfers engine rotation to belt-

Quinton Hazell Rear Wheel Bearing Kit • QWB905

Quinton Hazell · QWB905

Quinton Hazell QWB905 Rear Wheel Bearing Kit Replacement Quinton Hazell rear wheel bearing kit for Mazda MX-5 MK1/NA and MK2/NB/NB-FL 1.6 and 1.8 petrol models, including the 1.8i Turbo , as listed in the compatibility table. The rear wheel bearing supports the rotating hub and wheel while allowing

Quinton Hazell Front Hub & Wheel Bearing Kit • QWB1166

Quinton Hazell · QWB1166

Quinton Hazell QWB1166 Front Hub & Wheel Bearing Kit Replacement Quinton Hazell front hub and wheel bearing assembly for Mazda MX-5 MK1/NA and MK2/NB/NB-FL models without ABS listed in the compatibility table. The front wheel hub and bearing assembly supports the road wheel and allows it to rotate s

Quinton Hazell Ignition / HT Lead Set • XC650

Quinton Hazell · XC650

Quinton Hazell XC650 Ignition / HT Lead Set Replacement Quinton Hazell ignition / HT lead set for Mazda MX-5 MK1/NA 1.6 and 1.8, MK2/NB 1.6 and 1.8, and compatible MK2.5/NB-FL applications listed in the compatibility table. The ignition leads carry the high-voltage electrical output from the ignitio

Pipercross Viper Air Intake System – MX-5 Mk1 / NA 1.8 • VF107

Pipercross · VF107

For Mazda MX-5 Mk1 / NA 1.8 16V models from 08/1993 to 11/1994; specifically for the 1.8-litre naturally aspirated engine and not the 1.6. The Pipercross VF107 is a vehicle-specific Viper performance air intake system designed to replace the original Mazda air cleaner and associated intake arrangeme

Pipercross Viper Air Intake System – MX-5 Mk2 / NB 1.6 & 1.8 • VF159

Pipercross · VF159

For Mazda MX-5 Mk2 / NB and Mk2.5 / NB-FL 1.6 and 1.8 16V naturally aspirated models from 05/1998 to 11/2005. The Pipercross VF159 is a vehicle-specific Viper performance air intake system designed to replace the original factory airbox and intake arrangement on compatible Mazda MX-5 NB models. Supp

Genuine Mazda Crankshaft Main Bearing Cap Bolt • L3G2-10-352

Genuine Mazda · L3G2-10-352

Genuine Mazda L3G2-10-352 Crankshaft Main Bearing Cap Bolt Replacement Genuine Mazda crankshaft main bearing cap bolt for Mazda MX-5 Mk3, Mk3.5 and Mk3.75 NC models with 1.8 L8-VE or 2.0 LF-VE MZR petrol engines . This bolt passes through one of the crankshaft main bearing caps and threads into the

Genuine Mazda Connecting Rod Cap / Big-End Bolt • LF01-11-214A

Genuine Mazda · LF01-11-214A

Genuine Mazda LF01-11-214A Connecting Rod Cap / Big-End Bolt Replacement Genuine Mazda connecting rod cap bolt for Mazda MX-5 Mk3, Mk3.5 and Mk3.75 NC models with 1.8 L8-VE or 2.0 LF-VE MZR petrol engines . This bolt secures the removable connecting rod cap to the connecting rod around the crankshaf

Genuine Mazda 3rd / 4th Gear Synchroniser Clutch Hub Set – 6-Speed • P601-17-240

Genuine Mazda · P601-17-240

Genuine Mazda P601-17-240 3rd / 4th Gear Synchroniser Clutch Hub Set Replacement Genuine Mazda 3rd and 4th gear synchroniser clutch hub set for early Mazda MX-5 Mk3 NC models fitted with the six-speed manual transmission . The clutch hub set forms part of the 3rd/4th synchroniser assembly inside the

Genuine Mazda 3rd / 4th Gear Selector Fork – 6-Speed Manual • P601-17-40Y

Genuine Mazda · P601-17-40Y

Genuine Mazda P601-17-40Y 3rd / 4th Gear Selector Fork Replacement Genuine Mazda 3rd and 4th gear selector fork for early Mazda MX-5 Mk3 NC models fitted with the six-speed manual transmission . The selector fork is located inside the gearbox and engages with the 3rd/4th synchroniser sleeve. Movemen

Genuine Mazda Clutch Release / Slave Cylinder • NA01-41-920C

Genuine Mazda · NA01-41-920C

Genuine Mazda NA01-41-920C Clutch Release / Slave Cylinder Replacement Genuine Mazda clutch release cylinder for Mazda MX-5 Mk1 NA, Mk2 NB and Mk2.5 NB-FL models with manual transmission . Commonly known as the clutch slave cylinder, this component mounts externally to the gearbox bellhousing and co

Cast Alloy Competition Engine Sump (TR2-4A/Morgan +4)

301318

Precision cast alloy deep sump for the Triumph 4 cylinder wet liner engine.

Cast Aluminium Competition Engine Sump (TR5/TR6)

307834A

Precision cast aluminium alloy sump for the Triumph 6 cylinder engine.

Competition Exhaust Manifold (TR3/TR4)

TRE740

4-2-1 performance exhaust manifold for TR3A and TR4 engines.

Twin Side Draught Carb Fitting Kit

TRE91800

Mounting plates, washers and nuts for fitting twin Weber or Dellorto side draught carburettors.

Gearbox Gasket Set (TR2-6, A Type Overdrive)

515121A

Full gasket set for gearboxes fitted with A type overdrive.

Overdrive Adaptor Plate (J Type, TR6/Stag/Saloon/Sprint)

312305

Adaptor plate connecting gearbox to J-type overdrive unit.

Competition Condenser (External Fitment)

DCB101COMP

High quality externally mounted ignition condenser for classic cars including TR2-6.

4.1:1 Crown Wheel and Pinion (TR3-6)

505014

Replacement final drive gear set for Girling axle TR models and derivatives.

3.7:1 Crown Wheel and Pinion (TR3-6)

502127

Replacement final drive gear set for Girling axle TR models and derivatives.

3.9:1 Crown Wheel and Pinion (TR2-6)

502128

Replacement final drive gear set for Girling axle TR models and derivatives.

4.33:1 Crown Wheel and Pinion (TR2-6)

502523

Replacement final drive gear set for Girling axle TR models and derivatives.

4.55:1 Crown Wheel and Pinion (TR2-6)

503924

Replacement final drive gear set for Girling axle TR models.

Front Anti-Roll Bar Bush (21mm)

Front anti-roll bar bush for Mk2/2.5 models with standard suspension.

Gear Lever Insulator - Lower

Lower gear lever insulator with gasket for manual gearboxes.

Inlet Manifold Gasket (1.8 NA/NB)

Gasket sealing the inlet manifold to the cylinder head.

Black Vinyl Hood with Heated Glass Screen

Replacement convertible hood with heated glass rear window, fits Mk2/2.5 and Mk1 as upgrade.

Fuel Filter (Mk2/2.5)

Fuel filter for Mk2 and Mk2.5 1.6 or 1.8 engine models.

Radiator (Mk2/Mk2.5 1.6/1.8)

New replacement radiator for Mk2/2.5 1.6 and 1.8 engines, manual or automatic.

Radiator (Mk1 1.6/1.8)

New replacement radiator for Mk1 1.6 and 1.8 engines.

Radiator Cap

Pressure cap for the radiator on Mk1/2/2.5 models.

Radiator Coolant Bottom Hose (Mk1)

Bottom coolant hose connecting the radiator on Mk1 models.

Coolant Bottom Hose, Waterpipe to Waterpump (Mk1)

Coolant hose connecting the waterpipe to the waterpump.

Forte Advanced Formula Gas Treatment 400ml

Fuel additive that improves engine performance, cold starting, and reduces emissions.

Automatic Gear Selector Bush Set

Nylon bushes that fix a loose automatic gear selector stick.

Cusco Street ZERO Coilovers

Cusco · 429 61P CN

A twin-tube coilover suspension kit offering adjustable ride height and stiffer handling.

Cusco Street ZERO A Shock Absorbers

Cusco · 429 61N CN

Twin-tube shock absorbers built for improved street handling with long-lasting springs.

Cusco ZERO-3S Shock Absorbers

Cusco · 429 63S CN

Twin-tube shock absorbers designed for vehicle-specific stroke and stability with custom spring rates.

Cusco Folding Front Tow Hook

Cusco · 429 017 F

A heavy duty steel front tow hook with a swivel, foldable design for emergency towing.

Cusco Folding Rear Tow Hook

Cusco · 429 017 R

A heavy duty steel rear tow hook with a swivel, foldable design for emergency towing.

Cusco Front Sway Bar

Cusco · 429 311 A24

A larger diameter hollow front stabilizer bar that stiffens handling response.

Cusco Rear Sway Bar

Cusco · 429 311 B14

A solid rear stabilizer bar that is much stiffer than stock for improved handling.

Cusco Front Strut Tower Bar

Cusco · cus429 540 AT

A stiffer front strut bar that replaces the stock brace to improve chassis rigidity.

Cusco Strut Bar (ND) - Rear

Cusco · cus429 541 A 00B 540 C

Rear 2-point strut bar stiffening the chassis for improved handling.

Cusco Power Brace (ND) - Front

Cusco · 429 492 F

Front chassis brace linking suspension member to bulkhead for added rigidity.

Cusco Power Brace Floor (ND) - Center

Cusco · 429 492 C

Center chassis brace reducing body twist and flex for better handling.

Cusco Power Brace Floor (ND) - Rear

Cusco · 429 492 R

Rear chassis brace connecting chassis to suspension member to improve traction.

Moto-Lita B1 Steering Wheel Boss

Moto-Lita · B1-POL

Standard 9-bolt steering wheel boss machined from billet aluminium.

Moto-Lita B13 Steering Wheel Boss

Moto-Lita · B13-POL

Steering wheel boss with integrated top plate for selected early Morgans.

Moto-Lita B14 Steering Wheel Boss

Moto-Lita · B14-POL

Standard 9-bolt steering wheel boss machined from billet aluminium.

Moto-Lita B16 Steering Wheel Boss

Moto-Lita · B16-POL

Standard 9-bolt steering wheel boss machined from billet aluminium.

Moto-Lita B17 Steering Wheel Boss

Moto-Lita · B17-POL

Standard 9-bolt steering wheel boss machined from billet aluminium.

Moto-Lita B18 Steering Wheel Boss

Moto-Lita · B18-POL

Standard 9-bolt steering wheel boss machined from billet aluminium.

Moto-Lita B2 Steering Wheel Boss

Moto-Lita · B2-POL

Standard 9-bolt steering wheel boss machined from billet aluminium.

Moto-Lita B21 Steering Wheel Boss

Moto-Lita · B21-POL

Standard 9-bolt steering wheel boss machined from billet aluminium.

Moto-Lita B20 Steering Wheel Boss

Moto-Lita · B20-POL

Standard 9-bolt steering wheel boss machined from billet aluminium.

Moto-Lita B20 OE S/C Steering Wheel Boss

Moto-Lita · B20-SC-POL

Small-centre 9-bolt steering wheel boss machined from billet aluminium.

Moto-Lita B20A Steering Wheel Boss

Moto-Lita · B20A-POL

Standard 9-bolt steering wheel boss machined from billet aluminium.

Moto-Lita B22OE Steering Wheel Boss

Moto-Lita · B22-OE-POL

Steering wheel boss designed to take the original horn button.

Accelerator Linkage Set, Triple Stromberg (TR250/TR6)

1830

Upgraded accelerator linkage set for triple Stromberg carburetor setups on TR250 and TR6.

Accelerator Shaft Bushing Kit (Nylatron)

2651

Upgraded nylatron bushing kit for the accelerator shaft, fitting TR250, TR6, Spitfire MK1-3, and GT6.

Carburetor Shaft Folded Coupler

174

Folded coupler used on the carburetor throttle shaft linkage.

Carburetor to Manifold Spacer/Insulator, Stromberg 175CD

175

Insulator spacer that fits between the Stromberg 175CD carburetor and manifold.

Triple Manifold Kit, TR250/TR6

Intake manifold kit for triple Stromberg or SU carburetors, sold without carburetors.

Manifold and Carburetor Assembly, Triple SU HS6 (TR250/TR6, LHD)

Complete triple SU HS6 carburetor and intake manifold assembly for Triumph TR250 and TR6.

Manifold Kit, Triple Stromberg 150CD, GT6

Manifold kit for triple Stromberg 150CD carburetors on GT6 MK3, without carburetors.

Manifold Kit, Triple Stromberg 175CD, GT6

Manifold kit for triple Stromberg 175CD carburetors on GT6 MK3, without carburetors.

Fuel Line Kit, Triple Stromberg

003

Stainless steel fuel line kit for triple Stromberg carburetor setups.

Fuel Line Kit, Triple SU

Stainless steel fuel line kit for triple SU carburetor setups.

Cable Choke, Triple

Choke cable for triple carburetor assemblies on TR250/TR6.

Air Box, Triple Stromberg 175CD

Air box for triple Stromberg 175CD carburetors on Good Parts triple intake manifold for TR250/TR6.

Pad Set TR7 Mintex 1109

Mintex brake pad set for the Triumph TR7.

Mintex Brake Pads MDB1673-09 for Disc Brake Conversion TR3A/4

Replacement brake pad set for use with the disc brake conversion kit.

Rear Disc Brake Conversion Kit - TR4

A kit to convert rear drum brakes to disc brakes for improved braking performance.

Rear Disc Brake Conversion Kit - TR3G

A kit to convert rear drum brakes to disc brakes for improved braking performance.

Brake Pad Set - TR3G-4E (Mintex 1109)

Mintex brake pads for the Triumph TR3G-4E.

Brake Pad Set - TR7 (Mintex 1109)

Mintex brake pads for the Triumph TR7, also fitting certain MG Midget, Austin Healey Sprite and Rover Mini models.

Mintex MDB1673-09 Brake Pads (Disc Brake Conversion, TR3A/4)

Performance brake pad set for TR3A/4 disc brake conversions.

Uprated Wilwood Brake Kit (Lightspeed 4-Pot Calipers, Vented Discs)

An upgraded front brake kit featuring Wilwood 4-piston calipers and vented discs for improved stopping power.

TR6 Reinforced Hose Kit

Set of reinforced hoses for the TR6 cooling system.

Indicator Stalk (TR4-TR6, Lucas type)

Replacement indicator stalk for TR4 through TR6 models.

TR6 Wheel Trim Centre Badge

Decorative centre badge for TR6 wheel trims.

Brake Master Cylinder (TR5/TR6)

Replacement brake master cylinder for TR5 and TR6 models.

TR7/TR8 Heater Control Knob Set (3D Printed)

Replacement set of 3D printed heater control knobs.

TR7 Front Inner Wing/Flitch Panel Assembly (3-part)

Front inner wing and turret panel assembly for bodywork repair.

Uprated Wilwood Brake Kit with 4-Pot Calipers and Vented Discs

Performance brake upgrade kit featuring Wilwood 4-piston calipers and vented discs.

TR7 RH Front Inner Wing/Flitch Panel Assembly (3-part)

Right-hand front inner wing and turret panel assembly for bodywork repair.

Revotec 14" Electric Fan Kit with 32mm Controller (TR7)

Electric cooling fan kit with temperature controller for the TR7.

TR7/TR8 Braided Brake Hose Kit (Goodridge, Set of 3)

Stainless steel braided brake hose set for improved braking performance.

Water Pump (TR8/Rover V8/TVR)

Replacement water pump for Rover V8 engines used in TR8 and TVR models.

Classic Mini Ashtray Insert with Clock & USB (Green Digits)

Mini Spares · CLOCK04

Digital clock and USB port insert that replaces the classic Mini ashtray while preserving dashboard appearance.

Mini Dash Cards (Oval with Vents), Vinyl Powder Blue

Mini Spares · DT3038PB

Vinyl dash liners with vents for either side of the speedo on deluxe Mini models like the Cooper S.

Cooper S Main Stud and Nut Kit

Mini Spares · C-AJJ4011

Main stud and nut kit for Cooper S engines.

Cooper S ARP Main Stud and Nut Kit

Mini Spares · MSA33

ARP main stud and nut kit for Cooper S engines.

Allegro CV Joint for Special Mini Shafts

Mini Spares · 37H7869

Larger Allegro CV joint that fits Mini hubs but requires larger competition driveshafts.

Mini Miglia Wheel Arches

Mini Spares · MS127

Large fibreglass wheel arches for Minis, supplied in white gel coat requiring painting and fitting brackets.

Steering Rack Sportspack Mini LHD

Mini Spares · GSR1185

Left hand drive steering rack with reduced lock for Sportspack Mini models with 6x13 wheels, 1997 onwards.

Piston Ring Set 1275 GT/S R-Ring Type Chrome Cast Rings

Mini Spares · C1280.000

Set of compression and oil control piston rings for 1275 GT/S engines.

Mini Spares Rear Inertia Seat Belt (Red)

Mini Spares · MSSB1109RED

A 3-point automatic rear seat belt for classic Minis up to 1996, not suitable for MPI cars.

Mini Designer Mary Quant Decal Kit (Black Cars)

Mini Spares · MSSK2219

Aftermarket decal kit including side and boot decals with pinstripes for Mary Quant edition Minis.

Mk2 Mini Moke Wiring Harness Set

Mini Spares · WL319

Complete wiring harness with dip switch on steering column for dynamo-equipped Mk2 Moke.

Oil Pressure Relief Spring, Original Cooper S

Mini Spares · AEA536

Oil pressure relief valve spring for Cooper S models (1961-1971).

TR3-TR6 Front Disc Brake Kit (Toyota 4-Pot Caliper Conversion)

RATCO

A bolt-on front disc brake upgrade using modified Toyota 4-pot calipers with bored-out vented rotors, larger pads, custom hard brake lines, and mounting hardware for better braking with less fade than the original 2-pot setup. Fits TR3, TR4, TR5, TR250, TR6.

VTO Silverstone Wheel

RATCO

An aftermarket aluminum wheel design finished in gray, machined and clear-coated for low maintenance, made to fit classic Triumph models. Fits TR2, TR3, TR4, TR4A, TR5, TR250, TR6, TR7, TR8.

VTO Lemans Wheel

RATCO

An aftermarket aluminum wheel design finished in gray, machined and clear-coated for low maintenance, made to fit classic Triumph models. Fits TR2, TR3, TR4, TR4A, TR5, TR250, TR6, TR7, TR8.

VTO Retro 4 Wheel

RATCO

An aftermarket aluminum wheel design available in silver, gray or black finish, machined and clear-coated for low maintenance, made to fit classic Triumph models. Fits TR2, TR3, TR4, TR4A, TR5, TR250, TR6, TR7, TR8.

VTO Classic 8 Wheel

RATCO

An aftermarket aluminum wheel design available in silver or black finish, machined and clear-coated for low maintenance, made to fit classic Triumph models. Fits TR2, TR3, TR4, TR4A, TR5, TR250, TR6, TR7, TR8.

MGB/Midget Replacement Steering Wheel

RATCO

A newly made, slightly smaller steering wheel with a leather-wrapped padded rim and powder-coated spokes designed to use the original MGB hub for easy fitment. Fits MGB 70-76, Midget 75-79.

TR6 Replacement Steering Wheel (69-76)

RATCO

Replacement steering wheel for TR6 and early Spitfire models. The 1969 TR6 uses its own hub-specific version; select the correct year and hub when ordering.

Classic Steering Wheel Refurbishment (MGB/MGC/MGA/TR2-3/Austin Healey/etc)

RATCO

A rebuilding service that takes a customer's original 16.5 inch steering wheel, removes the old rim, polishes and powder coats the spokes, welds on a new smaller 14.5 inch leather-wrapped rim, and returns either the customer's own wheel or an exchange unit. Fits MGB, MGC, MGA, TR2/3, Austin Healey, Jensen, Jaguar and similar older cars.

TR6 Replacement Steel Swing Arm Set

RATCO

A newly designed pair of powder coated steel swing arms built as a stronger alternative to the increasingly hard-to-find original aluminum units. Fits TR6.

TR4/TR4A Rear Suspension Distance Piece

RATCO

A replacement steel spacer used in the rear suspension of later TR4 and all TR4A cars, powder coated for rust resistance in place of the original cast aluminum part. Fits Triumph TR4, TR4A.

TR4A SRA Tube Shock Conversion Kit without Distance Piece with Monroe Sensa-Track Shocks

RATCO · TCBK-09

Complete tube shock conversion with Monroe Sensa-Track shocks for TR4A solid rear axle cars lacking the distance piece. Fits Triumph TR4A SRA without distance piece.

TR4A SRA Tube Shock Conversion Kit without Distance Piece (Brackets Only)

RATCO · TCBK-08

Bracket kit converting the TR4A solid rear axle cars that lack the distance piece to telescopic tube shocks. Fits Triumph TR4A SRA without distance piece.

4-Cyl Single Carb TBI Fuel Injection Kit (No Distributor Upgrade) - Late Spitfire/MGB

MG, Triumph · TBI;4CY;N-1

Throttle body fuel injection conversion kit with idle air control for single carb engines, no distributor change.

4-Cyl Dual Carb TBI Fuel Injection Kit (No Distributor Upgrade) - TR3/TR4/MGA/MGB

MG, Triumph · TBI;4CY;N-2

Throttle body fuel injection conversion kit with idle air control for small/medium dual carb engines, no distributor change.

4-Cyl Single Carb TBI Fuel Injection Kit with Distributor Upgrade - Late Spitfire/MGB

MG, Triumph · TBI;4CY;M-3

Throttle body fuel injection conversion kit with ignition mapping distributor upgrade and idle air control for single carb engines.

4-Cyl Dual Carb TBI Fuel Injection Kit with Distributor Upgrade - TR3/TR4/MGA/MGB

MG, Triumph · TBI;4CY;M-4

Throttle body fuel injection conversion kit with ignition mapping distributor upgrade and idle air control for small/medium dual carb engines.

4-Cyl Dual Carb TBI Fuel Injection Kit with Distributor Upgrade - TR4A dual ZS175CD

Austin, MG, Triumph, TVR · TBI;4CY;M-8

Throttle body fuel injection conversion kit with ignition mapping distributor upgrade and idle air control for dual carb setups.

4-Cyl Dual Carb TBI Fuel Injection Kit (No Distributor Upgrade) - TR4A dual ZS175CD/SU HD8/HS8

Austin, MG, Triumph, TVR · TBI;4CY;N-6

Throttle body fuel injection conversion kit for engines with two medium/large carbs, including idle air control.

Idle Air Control (IAC) Valve

Austin Healey, Triumph · IAC

Plug-and-play idle air control valve for TBI conversions, required for A/C and automatic transmission cars.

ZS 175 Decorative Adapter Cover

Triumph · ZS175DAC

Billet aluminum cover machined to match Zenith Stromberg 175 carburetors.

TR3/TR4/TR4A Fan Eliminator Kit (Grade 8 Bolt)

Triumph · FEK;TR3/4-8

A kit that removes the engine cooling fan, using a grade 8 bolt for the crankshaft pulley.

TARK-KS Trailing Arm Drill/Tap Guide Kit

Triumph · TARK-KS

Guide kit for installing key-lock Keenserts in trailing arms.

TARK-HC Trailing Arm Drill/Tap Guide Kit

Triumph · TARK-HC

Guide kit for installing Helicoil thread inserts in trailing arms.

TARK-3/8 Trailing Arm Drill/Tap Guide Kit

Triumph · TARK-3/8

Guide kit for drilling and tapping trailing arms for 3/8 inch studs.

Steering Column Lifter Bracket

A bracket that raises the steering wheel position by about 20mm for improved driving comfort.

Gauge Bezels

CNC-machined aluminium bezels that fit over Smiths gauges to enhance the dash appearance.

Scuttle Vent Cover

A finer-grilled replacement scuttle vent cover that keeps debris from blocking the bodyshell plenum drains.

Minilite Centre Caps (TR6)

Billet aluminium press-fit centre caps with embossed TR6 logo for Minilite wheels.

Konig Rewind Centre Caps

CNC-machined aluminium press-fit centre caps designed for Konig Rewind wheels.

GT6 Centre Caps for John Brown Wheels

CNC-machined aluminium press-fit centre caps designed for John Brown Wheels on the GT6.

Bodyshell Lifting & Bracing Frame Kit (TR4-6)

A bolt-in frame that lifts and stiffens the bodyshell without cutting or welding.

Rear Crank Seal Kit, GACO Type (TR2-4A)

Lip-type rear main crankshaft oil seal kit to stop rear main bearing oil leaks.

Front Wheel Bearing Spacer Kit

Kit that strengthens front stub axles and reduces brake pad knock-back via a solid bearing spacer tube.

Steering Geometry Improvement Kit (TR2-3B)

Kit of steering arms and tie rods that corrects negative Ackerman angle.

Front Sidelight Indicator RH (TR250)

Complete right-hand front sidelamp assembly with amber flasher and repeater for TR250.

Amber Lens and Trim Rim for Front Sidelight Indicator (TR250)

Replacement amber lens and trim rim for the TR250 front sidelight indicator.